NAG Library Routine Document

e04nrf  (qpconvex2_sparse_option_file)

 Contents

    1  Purpose
    7  Accuracy

1
Purpose

e04nrf may be used to supply optional parameters to e04nqf from an external file. The initialization routine e04npf must have been called before calling e04nrf.

2
Specification

Fortran Interface
Subroutine e04nrf ( ispecs, cw, iw, rw, ifail)
Integer, Intent (In):: ispecs
Integer, Intent (Inout):: iw(*), ifail
Real (Kind=nag_wp), Intent (Inout):: rw(*)
Character (8), Intent (Inout):: cw(*)
C Header Interface
#include nagmk26.h
void  e04nrf_ ( const Integer *ispecs, char cw[], Integer iw[], double rw[], Integer *ifail, const Charlen length_cw)

3
Description

e04nrf may be used to supply values for optional parameters to e04nqf. e04nrf reads an external file and each line of the file defines a single optional parameter. It is only necessary to supply values for those arguments whose values are to be different from their default values.
Each optional parameter is defined by a single character string, of up to 72 characters, consisting of one or more items. The items associated with a given option must be separated by spaces, or equals signs =. Alphabetic characters may be upper or lower case. The string
Print Level = 1
is an example of a string used to set an optional parameter. For each option the string contains one or more of the following items:
a mandatory keyword;
a phrase that qualifies the keyword;
a number that specifies an integer or real value. Such numbers may be up to 40 contiguous characters in Fortran's I, F, E or D formats, terminated by a space if this is not the last item on the line.
Blank strings and comments are ignored. A comment begins with an asterisk (*) and all subsequent characters in the string are regarded as part of the comment.
The file containing the options must start with Begin and must finish with End. An example of a valid options file is:
Begin * Example options file 
   Print level = 5 
End
Optional parameter settings are preserved following a call to e04nqf and so the keyword Defaults is provided to allow you to reset all the optional parameters to their default values before a subsequent call to e04nqf.
A complete list of optional parameters, their abbreviations, synonyms and default values is given in Section 12 in e04nqf.

4
References

None.

5
Arguments

1:     ispecs – IntegerInput
On entry: the unit number of the option file to be read.
Constraint: ispecs is a valid unit open for reading.
2:     cw* – Character(8) arrayCommunication Array
Note: the dimension of the array cw must be at least lencw (see e04npf).
3:     iw* – Integer arrayCommunication Array
Note: the dimension of the array iw must be at least leniw (see e04npf).
4:     rw* – Real (Kind=nag_wp) arrayCommunication Array
Note: the dimension of the array rw must be at least lenrw (see e04npf).
5:     ifail – IntegerInput/Output
On entry: ifail must be set to 0, -1​ or ​1. If you are unfamiliar with this argument you should refer to Section 3.4 in How to Use the NAG Library and its Documentation for details.
For environments where it might be inappropriate to halt program execution when an error is detected, the value -1​ or ​1 is recommended. If the output of error messages is undesirable, then the value 1 is recommended. Otherwise, if you are not familiar with this argument, the recommended value is 0. When the value -1​ or ​1 is used it is essential to test the value of ifail on exit.
On exit: ifail=0 unless the routine detects an error or a warning has been flagged (see Section 6).

6
Error Indicators and Warnings

If on entry ifail=0 or -1, explanatory error messages are output on the current error message unit (as defined by x04aaf).
Errors or warnings detected by the routine:
ifail=1
The initialization routine e04npf has not been called.
ifail=2
At least one line of the options file is invalid.
Could not read options file on unit ispecs =value.
Could not read options file on unit ispecs. This may be due to:
(a) ispecs is not a valid unit number;
(b) a file is not associated with unit ispecs, or if it is, is unavailable for read access;
(c) one or more lines of the options file is invalid. Check that all keywords are neither ambiguous nor misspelt;
(d) Begin was found, but end-of-file was found before End was found;
(e) end-of-file was found before Begin was found.
ifail=-99
An unexpected error has been triggered by this routine. Please contact NAG.
See Section 3.9 in How to Use the NAG Library and its Documentation for further information.
ifail=-399
Your licence key may have expired or may not have been installed correctly.
See Section 3.8 in How to Use the NAG Library and its Documentation for further information.
ifail=-999
Dynamic memory allocation failed.
See Section 3.7 in How to Use the NAG Library and its Documentation for further information.

7
Accuracy

Not applicable.

8
Parallelism and Performance

e04nrf is not threaded in any implementation.

9
Further Comments

e04nsf, e04ntf or e04nuf may also be used to supply optional parameters to e04nqf.

10
Example

This example minimizes the quadratic function fx=cTx+12xTHx, where
c = -200.0,-2000.0,-2000.0,-2000.0,-2000.0,400.0,400.0T  
and
H= 2 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 2 2 0 0 0 0 0 2 2 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 2 2 0 0 0 0 0 2 2  
subject to the bounds
000x10200 000x22500 400x30800 100x40700 000x51500 000x61500 000x71500  
and to the linear constraints
x1 + x2 + x3 + x4 + x5 + x6 + x7 = 2000 0.15x1 + 0.04x2 + 0.02x3 + 0.04x4 + 0.02x5 + 0.01x6 + 0.03x7 60 0.03x1 + 0.05x2 + 0.08x3 + 0.02x4 + 0.06x5 + 0.01x6 100 0.02x1 + 0.04x2 + 0.01x3 + 0.02x4 + 0.02x5 40 0.02x1 + 0.03x2 + 0.01x5 30 1500 0.70x1 + 0.75x2 + 0.80x3 + 0.75x4 + 0.80x5 + 0.97x6 250 0.02x1 + 0.06x2 + 0.08x3 + 0.12x4 + 0.02x5 + 0.01x6 + 0.97x7 300  
The initial point, which is infeasible, is
x0=0.0,0.0,0.0,0.0,0.0,0.0,0.0T.  
The optimal solution (to five figures) is
x*=0.0,349.40,648.85,172.85,407.52,271.36,150.02T.  
One bound constraint and four linear constraints are active at the solution. Note that the Hessian matrix H is positive semidefinite.

10.1
Program Text

Program Text (e04nrfe.f90)

10.2
Program Data

Program Options (e04nrfe.opt)

Program Data (e04nrfe.d)

10.3
Program Results

Program Results (e04nrfe.r)

© The Numerical Algorithms Group Ltd, Oxford, UK. 2017